The Hydrogen Shop

Please Note.
The postage specified at the buy now in Pay Pal is set for UK and the USA. If this does not suit your location please Email and we will get you a quote to your ZIP code
.
Mail
WFC

     

High pressure clear PVC pipe with seven 316L grade SS tubes. This is a close replica of the Stanley Meyer's electrolyzer. All anode and cathode connectors are fully welded 316. Seven cells each in 316L grade stainless. 25.4 mm in diameter, 280 mm long. 19.05 mm in diameter, 320 mm long. The resonance cavity between the two tubes is 1.57 mm X 280mm Clear PVC length 500 mm x 100 mm.

Item Number- WFC-002 Weight net 8.9 Kg

PDF File ... More Info...Parts List info

Electrolyzer

Price

$714.00

 

MicroStar

     

The Micro Star. 2.705-v4.1
Designed around the Microchip PIC16F648 8 bit micro controller. This is the completed unit boxed in a fully labeled case with the output driver board, e.g. Nova Star . Ready to use. Frequency, duty cycle, marked spacing, etc controlled by the Processor.
The computer gives a direct read-out of the frequency back to a small LCD screen. The user can therefore adjust all these parameters at the touch of a small 12 digit key pad.
Item Number- WFC-020 Weight net 1.25 Kg

Operating System 2.605 ... PDF File ... PW Supply PDF... More Info

The Micro Star

Price

$320.00

 

starKIT

     

The Micro Star. 2.705-v4.1

We also make the Micro star available in modular form. PCB Assembled.
This is the processor signal generator complete with key pad and display.
You still require a power amplifier output stage, the nova Star or your own power transistor Stage. The board comes with the MOSFET driver MCP1407 if needed.    

Item No.WFC-018

Electronic components Parts List1 ... More Info

The Micro Star processor module

Price

$ 139.50

 

electronics

Electronic Kits

The Micro Star. 2.705-v4.1

KIT of Parts.This is the processor signal generator complete with key pad and display and all components to assemble your onw Microstar.

Item Number- WFC-023

Electronic components Parts List1

The Micro Star

processor module

Price

$ 112.00

 

Nova Star

The Nova Star is an optically-coupled power output amplifier board.  This unit can be connected to any PWM signal source, e.g. a lap top computer, the Micro Star, etc. without any fear of high voltage spiking damaging sensitive circuits
The Nova Star carries an extra large heat sink, high voltage, ultra-fast, and super barrier diodes.  The circuit is fully shielded with voltage regulators and optically-coupled. 
The Nova Star comes as a standard fitted unit to the Micro Star WFC-020. 

Item Number- WFC-016

Assembly PDF File ... PW Supply PDF ... More Info

Nova Star

Price

$110.95.

 

Nova Star

 

Electronic Kits

Nova Star KIT of Parts

The Nova Star is an optically-coupled power output amplifier board to be assembled.

Item No. WFC-014

Parts List2.... More Info

Nova Star Electronic Kit

price

$84.50 Each.

 

MMG

A pulse motor controller. Robert Adams motor controller.Micro controller .
Controlling the timing will enable precise current flow to optimize the efficiency.
All parts are included in this kit from the magnet to the drive MOSFET.
Parts included, Magnet, Hall Sensor, LCD display, Wiring, Processor controller preprogrammed.. Item Number MMG –041

More Info... User manual PDF .. Parts List

new user manual now available

Magnetic Motor Generator Electronics

Price

$149.95

 

Robert Adams

 

Electronic Kits

A pulse motor controller. Robert Adams motor controller.Micro controller.complete with key pad and display and all components to assemble your onw pulse motor drive.

Item No. MMG-023

Parts List... User manual PDF

A pulse motor controller

price

$129.50 Each.

 

316L

 

One Stainless Steel Cell complete with two end cap spacer and connections
316 grade stainless steel in two sizes.
25.4 mm in diameter, 280 mm long.
19.05 mm in diameter, 327 mm long.
The 19.05 can be fitted to the inside of the 25.4 mm section).
The resonance cavity between the two tubes is 1.57 mm. Size cut to order.Each tube can be purchased individually and combined to make a cell with as many tubes as desired.

Item No. WFC-007 Weight net 0.9 Kg

One Stainless Steel Cell

Price

$47.95

 

Claer PVC

 

Clear PVC water Pipe

Clear PVC water Pipe This high pressure grade is perfect for the electrolyze. if you are considering the Stanley Meyer's experiments and conditioning the cells this Clear tubing gives you full view of your progress .Inside Diameter 100 mm, length of 500 mm wall thickness 6 mm.$79.95 

Item No. WFC-000

PVC fact sheet.

Clear PVC water Pipe

price

$79.95 

 

5.6mHenries

 

Drive coils
large inductors
On iron core 9.0 m Henries .9 ohm

Item No. MMG-002

Inductor Coils

price

$28.95 Each.

 

5.6mHenries

 

Drive coils
large inductors
On iron core 5.6m Henries .5 ohm

Item No. MMG-003

nductor Coils

price

$28.95 Each.

 

 

Pressure Gauge / /Out of stock

Item No. WFC-003

Pressure Gauge

Email for availability

price

$33.95 Each.

 

Flash Back

 

Develop and design BYHHN-HydroTech.
This unit protect your HHO Generator from flame that can come from the engine as result of a back fire, priventing explosion or fire.
 Is 4" length, and fit good on your 1/2" x 3/8 " tubing or gas line.  
To watch a video of  this Fire Arrestor click this link now.  Remember .., install a flashback killer/arrestor today and protect your Hydrogen Generator. $53.95 Each. http://www.youtube.com/watch?v=XhQn-EsJFDg

Item No. WFC-006

Flash back arrestors

Email for availability

price

$53.95 Each.

 

Magnets

 

30 x 25.4mm N45 Rare Earth 6000 gauss

other sizes available

Item No. MMG-007

Rare Earth Magnets

Email for availability

price

$ Each.

 

PVC

 

PVC Disc. Machined from a solid peace of PVC

Standard size, D 150 mm x 10 mm Center Hole 10 mm

We can also machine to suite, please Email us with your specification.

Item No. MMG-005

PVC Disc

Email for availability

price

$30.50 Each.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hydrogenAcceptance Markhydrogen